DevKit quick start

You have got your hands on our DevKit!
We prepared a step-by-step tutorial for quick start. Follow the instructions below.

Devkit quick start

You have got your hands on our DevKit!
We prepared a step-by-step tutorial for quick start. Follow the instructions below.

Prepare for setup Tracking area setup Software setup • Installing • Environment • Placement • Device Network Device update • Alt Tracker • Alt Tag • Alt Bracer • Alt HMD Radio Socket • Alt USB Socket • Alt PicoG2 Socket Wireless devices Download SDK Run samples Troubleshooting

AltBracer

Make sure that your devices are fully charged. Otherwise shutting down during the upgrade procedure may cause damage to devices.

Upgrade all of your AltTags and AltBracers first. And only after AltTags and AltBracers have been upgraded, proceed to AltHmdRadioSockets upgrade procedure.

  1. Connect the AltBracer to AltHmdRadioSocket
  2. Run the upgrade application at: AntilatencyLegacyUpdate_AltBracer_v4.0.0\AntilatencyLegacyDeviceUpdate.exe
  3. Wait until Step 2 is complete...

    After Step 2 is complete the AltBracer will receive a new radio-protocol and won't be able to connect to the old AltHmdRadioSocket.


    Application will be halted until you connect the AltTag to upgraded AltHmdRadioSocket.

    If you have only one AltHmdRadioSocket, you can close the application. After all of your AltTags and AltBracers will receive a new radio-protocol, proceed to AltHmdRadioSocket upgrade.

  4. Connect the AltBracer to upgraded AltHmdRadioSocket
    Run the upgrade application again if you closed it after Step 2.

    The application will complete upgrade procedure.


  5. Done! You're breathtaking!

For your convenience, we and our partners use cookies on this website. If you do not change the settings, we will treat this as consent with data usage policy on antilatency.com